How To Get Air Out Of Your Hayward Pool Pump

A Guide for Maintaining a Sparkling Swim Zone

Having your own backyard pool is a dream come true. You get to relax, have fun, and enjoy the sunshine with friends and family. But sometimes, you might find yourself in a situation where your Hayward pool pump seems to be struggling, air pockets are present, and your pump just isn’t working its best. Don’t worry, this is actually quite common! A little bit of know-how can solve this problem and have you back to enjoying those cool dips without any hassle.

Hayward pool pumps work hard to keep your water clean, balanced, and flowing through your system. But these pumps are also designed with a complex plumbing system that can sometimes lead to air pockets being trapped inside the pump itself. These air pockets create resistance in the flow of water and hinder the efficiency of the pump.

The good news is that getting air out of your Hayward pool pump isn’t as daunting as it might seem. With a few simple steps, you can get rid of those pesky air pockets and enjoy the smooth operation of your Hayward pump once more. This guide will walk you through different approaches to tackle this common issue.

Before diving into the specifics, let’s understand why these air pockets even form in the first place. When there are issues with water circulation or a buildup of debris, it can lead to the formation of air bubbles within your Hayward pump system. These bubbles get trapped inside the pump and create resistance as they impede the flow of water.

Understanding the Sources of Air Pockets

There are several common reasons why you might develop air pockets in your Hayward pool pump:

1. Improper installation: Sometimes, during initial setup or any plumbing work around the pump, air can get introduced into the system. If not properly sealed and connected, air will inevitably find its way past connections.
2. Water flow issues: A lack of proper water flow can contribute to air pockets forming. This often happens in a stagnant pool with slow-moving water.
3. High pressure buildup: If the pump is operating at high pressure, which can happen when there’s too much chlorine or a build-up of debris, it might cause air to be trapped inside the system.

Identifying the source of your air pockets is crucial for solving the problem effectively. Once you pinpoint the cause, you can implement the appropriate solution mentioned above.

Methods for Removing Air Pockets from Your Hayward Pump

Now that we’ve covered why air gets trapped in your Hayward pumps, let’s dive into some of the most effective methods to remove it:

1. Manual Drainage Method:

This is a straightforward method that involves manually draining the air pockets from your pump.

1. Disconnect the power supply: Before you begin, ensure the pump’s power is off to avoid any electrical hazards.
2. Remove the pump lid: Carefully remove the lid of your Hayward pump. This gives you access to the internal parts, where the air pockets are likely trapped
3. Locate the drain valve: Most pool pumps come with a designated drain valve located on the bottom or side.
4. Drain the water manually: You can use a bucket or other container to collect and release the water from the valve. You may need to repeat this process multiple times until you see little to no air bubbles in the system

While this method is straightforward, it might not be entirely efficient for large pools. If you have a bigger pool, manual draining can be time-consuming and could lead to additional water waste.

2. Vacuuming Air Pockets:

Using a vacuum pump specifically designed for removing air pockets in plumbing systems is another effective way to tackle this issue. These pumps are typically used for drainage purposes but can also effectively remove air pockets from your Hayward pool system.

1. Connect the vacuum line to the air pocket’s source: Find a connection point for your vacuum pump, ensuring you have access to the area where air pockets are trapped within the pump
2. Run the vacuum pump: Start the vacuum and let it run until the air pockets are completely removed. You should observe bubbles being sucked out of the system.

While this method is highly effective, make sure to choose a vacuum pump that has enough suction power to handle your Hayward pool’s specific requirements.

3. Professional Assistance:

If you’re struggling with persistent air pockets or unsure about handling the process without expertise, seeking professional help from a certified pool technician is always an option. They have specialized tools and knowledge to address these issues effectively and safely.

A trained technician can access the pump’s inner workings and identify the source of the leak, ensuring that it doesn’t reappear after draining. This saves you time, effort, and potential plumbing damage.

Remember, maintaining a clean and well-functioning Hayward pool pump is an important part of overall enjoyment. By implementing these strategies to address air pockets in your system, you can ensure smooth operation and continued swimming bliss without any unnecessary frustration.

For more tips on pool maintenance and troubleshooting, visit our website or follow us on social media!